MyFireplaceBlower
FK26 Stove Blower Fan Kit for Vermont Castings
- UPC:
- 810136901498
- MPN:
- 2767
- Availability:
- In Stock - Free shipping to 48 States. Ships to Canada USPS. Normally ships by Next Business Day.
Description
Our FK26 Blower Fan Kit is designed to replace Vermont Castings #0002767 for: Dutchwest 2465 Direct Vent Gas Stove & 2467 Natural Vent Gas Stoves, Stardance SNV30 Natural Vent Gas Stove, Radiance Direct Vent Gas Heater, Vermont Castings EWF30 and other CFM fireplaces to circulate air around the firebox and increase heat output. This complete fireplace blower kit pushes heat created by the stove into your living space.
Included with the blower fan: Variable Speed Switch, (rheostat control - like a light dimmer) which you can regulate air flow and any air noise from the fireplace fan and Heat Sensor; which will turn the blower OFF and ON Automatically.
FK26 Blower Kit Installation Instructions
Fireplace Blower Kit Includes
- Blower
- Mounting Base, Brackets and Hardware
- Variable Speed Control & Heat Sensor
- Power Cord with 3-Prong Plug
- Installation Instructions
- 1 Year Comprehensive Warranty
Product Specifications
- Dimensions in Inches: W: 12.91 x H: 5.02 x D:5.64
- Motor is equipped with Thermal Safety Switch
- Bearing Construction Type: Ball Bearings
- CFM: 130
- AMPS: 0.92
- HZ: 60
- Volts: 115
- RPM: 3000 (1/2400 with load)
- Rotation: CCW
- Blower Wheel Dimensions: Width: 4in (101mm) Diameter: 3in (76mm)
Product Benefits
- This fireplace blower fan produces high airflow and is manufactured with quality parts and components
- Increase Heating Potential of your fireplace insert with this High Airflow Blower Fan
- Simple wiring connections makes installation Quick and Easy
If you have had any custom work done to your stove or heater, compare the dimensions listed with the clearance in your appliance to insure proper fit.
This stove blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket stove blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact heater model, though we try to provide technical support in assisting you.
Additional Information
COMPATIBLE BRAND: |
Vermont Castings |
PART NUMBER: |
FK26 |
PART NUMBER: |
0002767 |
PART NUMBER: |
BK-VC |
COMPATIBLE STOVE: |
Defiant 1975-CAT-C |
COMPATIBLE STOVE: |
Defiant Flexburn |
COMPATIBLE STOVE: |
Encore 2040-CAT-C |
COMPATIBLE STOVE: |
Encore 2040 FlexBurn |
COMPATIBLE FIREPLACE: |
EWF36A |
COMPATIBLE FIREPLACE: |
EWF30 |
27 Reviews
-
FK26 Blower for Dutchwest 2477
Overall this fan unit works very well. I was a bit frustrated that the instructions were not that clear and are hard to read/see the details. Fortunately, my stove already had screws to re-use as the ones sent did not fit. Also, the instructions say to install the rheostat near the front left leg. My stove does not have a spot to install there, so I installed on right hand side.
-
Blower Fan Kit
Blower arrived quickly, it was the correct model, easy to install and works great!
-
FK26 Stove Blower Fan Kit
When the fan is operating it works very well moving air and is relatively quiet... The stove must be very hot for the fan to start, I'd prefer that it came on at a lower temperature... The installation instructions leave a lot to be desired... Overall, we're happy with the product...
-
havent installed
fast delivery
-
FK26 STOVE BLOWER FAN KIT FOR VERMONT CASTINGS
Quality built fan, instructions were accurate and was easy to install. Fan runs well. Contacted Customer Service to order fan and they were very helpful.
-
FK26 Blower Fan Kit
Bought this as a replacement for a worn out and fan and did a DIY replacement. This fan is as advertised and is better than the original. Works great, works quiet
-
FK26 STOVE BLOWER FAN KIT FOR VERMONT CASTINGS
Easy to install and works as expected. There is one problem, the wiring for the rheostat is a bit short. There is a tab on the rheostat that dictates the direction it mounts on the bracket. Once installed the wire on the rheostat comes off it in the front vs back and the wire is pulled tight.
-
Blower Fan for Stardance SDV30R
We never have had a fan on our fireplace and this works great. My only complaint is that the instructions are missing a few steps - mainly that it doesn't show if you put the skirt back on. Unfortunately for us, the bolts on the "fire box" were way to rusty to take off so I mounted the fan on the back of the skirt so it's exposed and blows up the back of the fireplace on the outside. It seemed odd that they wanted to put it inside the skirt anyway because wouldn't the air be blocked by the top plate?? Also, the snap stat is mounted on the outside of the skirt also (that bolt was all rusted also). Anyway - it seems to work fine - comes on around 110 degrees, and runs for awhile after the fireplace turns off to continue to dissipate the heat. This doesn't interlock with our fireplace at all, it's strictly based on the temperture of the snapstate location.
-
Wood stove fan kit
Fan kit was complete and fit my Vermont Castings Defiant 1610NC perfectly. The instructions that I was sent were of no use as they did not include my stove model. Luckily proper installation instructions were able to be fouls with a quick internet search. Definitely helped the heat output of the stove.
-
just as suspected an exact replacement of the origiomal
fast drlivery