Heatilator
FK4 Fireplace Blower for Heatilator GNBC33, GNBC33LE Fireplace
- Availability:
- In Stock - Free shipping to 48 States. Ships to Canada USPS. Normally ships by Next Business Day.
Description
Our FK4 Blower Fan Kit is designed for the Heatilator GNBC33, GNBC33LE gas fireplace insert to circulate air around the firebox and enhance heat output. This complete fireplace blower kit offers a low cost solution to push heat created by the fireplace into your living space.
Included with the blower kit: Variable Speed Switch, (rheostat control - like a light dimmer) which you can regulate air flow and any air noise from the fireplace fan and Thermo Switch (Thermodisc), a Heat Sensor which automatically turns the Blower ON after the fireplace heats up and automatically turns the Blower OFF after the fireplace cools down.
FK4 Blower Kit Installation Instructions
Fireplace Blower Kit Includes
- Blower
- Variable Speed Control
- Thermodisc - Automatically turns blower on at 120F and turns blower off at 90F
- Cord Set with 3-prong Power Cord
- Adhesive Velcro Strips/Dampening Pad - (Easy to install plus reduces Vibration)
- Installation Instructions
- 1 Year Comprehensive Warranty
Product Specifications
- Dimensions in Inches: W: 12.94 x H: 3.6 x D:4.27
- Motor is equipped with Thermal Safety Switch
- Bearing Construction Type: Ball Bearings
- CFM: 135
- AMPS: 0.74
- HZ: 60
- Volts: 115
- RPM: 3000 (1/1400 with load)
- Rotation: CW
- Blower Wheel Dimensions: Width: 9.45in (240mm) Diameter: 2.56in (65mm)
- Anti-Vibration Impellers & Vortex Regulation Tabs to provide a steady airflow
Product Benefits
- This fireplace blower fan produces high airflow and is manufactured with quality parts and components
- Increase Heating Potential of your gas fireplace insert with this High Airflow Blower Fan
- Simple wiring connections makes installation Quick and Easy
If you have had any custom work done to your gas fireplace insert, compare the dimensions listed with the clearance in your appliance to insure proper fit.
FK4 Fireplace Blower Diagram with Dimensions
This fireplace blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket fireplace blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact fireplace model, though we try to provide technical support in assisting you.
Additional Information
FIREPLACE BLOWER KIT: |
FK4 |
COMPATIBLE BRAND: |
Heatilator |
COMPATIBLE FIREPLACE: |
GNBC33, GNBC33LE |
3 Reviews
-
F4K Fireplace Blower
I happy with this blower, especially when I read other reviews and learned how to use it properly.
-
Exactly what we needed
Works great and blows out lots of hot air from the fireplace
-
Very good product
Good product, delivered quickly, works well, and operates quietly. The only issue that I had was that the wiring harness was not long enough to place the thermostat in an effective area. The instructions called for placing the thermostat on the bottom of the fireplace, to control the fan operation. The bottom of my fireplace unit, must be very well insulated, because it never heated up enough to turn on the fan. I had to extend the wiring harness to allow placing the thermostat on the top of the firebox, so that the thermostat heated up enough to turn on the fan. If the wiring harness for the thermostat was a few feet longer, and the instructions called for placing the thermostat on the top of the firebox, I would have rated this product at a 5/5.
Related Products
FK4 Fireplace Blower for Heatilator GNBC36, GNBC33LE Fireplace
Heatilator
FK4 Fireplace Blower for Heatilator GNDC36 Gas Fireplace
MyFireplaceBlower
FK4 Fireplace Blower for Heatilator BCDV36 Gas Fireplace
Heatilator