FK-ESC Electronic Fan Speed Control Module

The FK-ESC Speed Control Module adjusts the air output of the fan/blower and can be used in Gas Burning Fireplaces.

This Electric Fan Module has a built in timer to activate the blower/fan at the speed you set.

• The speed control will turn ON the fan automatically 7 minutes after the fireplace has been turned ON and turn the fan OFF 12 minutes after the fireplace has been turn OFF.
• There are four speeds, Hi, Medium Hi, Medium Lo, Lo and OFF.
• The FK-ESC will remember the last setting used and remain on that setting until changed. See the Installation instructions for more details.

The FK-ESC replaces the fireplace blower cord set which incorporates the Variable Speed Control and Thermodisc/Heat Sensor.

Power must be provided through an approved factory installed junction box from the hearth product’s manufacturer.

• Two-year warranty
• Best warranty in the industry
• Toll free installation support
• Real people, real tech support, real fast

 Contents:

1) Jumper Wire - For Power Strip Style Junction Box

2) Jumper Wire - For IPI Gas Valve with screw

3) FK-ESC Speed Control Module

4) Ground Wire with screw

5) Jumper Wires for Millivolt Gas Valve

 FK-ESC Electronic Speed Control Installation Instructions