Rocky Mountain Heater for Wood Burning Fireplaces

'Rocky Mountain' Fireplace Heaters are a bit BIGGER than the "FH" Series heat exchangers. The Heater unit has Leg Height of 1 1/2 " which sits on the floor of your fireplace and were designed to boost the convection heat produced by your fireplace. The Fireplace Heater draws in the cool air from your living space, circulates it through the hot tubes and then pushes the heated air back into your room. (MINIMUM firebox Depth is 19" and MINIMUM firebox Height is 23") for this fireplace heater.

Our exclusive design affords you an 18% increase in heat generated within the tubes, and in turn up to a 45% increase in the heat pumped into your living space.

Included with fireplace heater: ALL sizes come with Larger Variable Speed Blower Motor (150 CFM) pumping out up to 100,000 BTU's.

If you have GLASS Doors - we recommend checking out The Original Grate Heater

How does the Fireplace Heater Work?

• This is a completely enclosed system preventing any smoke from entering your living space.
• Tubes act as fireplace grate
• Fireplace Heater Assembly fits fireplaces larger than 20" wide.
• Simply build your fire on top of the steel tubes which will heat the air flowing through.

 Rocky Mountain Heat Exchanger Installation Instructions

Fireplace Heater Includes

• (Large) Variable Speed Motor (150 CFM) for ALL sizes
• 7 Foot Power Cord
• Installation Instructions
• 5 Year Manufacturer's Warranty

Product Specifications

• Dimensions in Inches: (RM5 - 5 Tubes) Heater Only Width at base: 32 - Width at top: 18 1/8
• Dimensions in Inches: (RM6 - 6 Tubes) Heater Only Width at base: 36 - Width at top: 22
• Dimensions in Inches: (RM7 - 7 Tubes) Heater Only Width at base: 40 - Width at top: 25 7/8
• Dimensions in Inches: (RM8 - 8 Tubes) Heater Only Width at base: 44 - Width at top: 29 3/4
• Dimensions in Inches: (RM9 - 9 Tubes) Heater Only Width at base: 48 - Width at top: 33 5/8
• Dimensions in Inches: (RM10 - 10 Tubes) Heater Only Width at base: 52 - Width at top: 37 1/2
• Manufactured with Aluminized Steel

Product Benefits

• Increase your fireplace's efficiency up to 500%
• Increase Heating Potential of your fireplace insert with this High Airflow fireplace heater. Individual results may vary.
• Designed to withstand intense temperatures
• Note: Minimum fireplace depth is 19" for this heater.
• Attention: this heater is not recommended for use with glass fireplace doors.

Will it fit in your Fireplace?: Measure the fireplace width in Front and in Back, along with Depth to determine which model will fit best. The fireplace's dimensions only need to be bigger than the Fireplace Heater's dimensions to work. FH5 Fireplace Heater will fit any fireplace greater than 20" Wide x 19" Deep x 23" High.

These Rocky Mountain Fireplace Heaters are Manufactured in the USA.