MyFireplaceBlower
GFK4B Fireplace Blower Fan Kit for Heatilator ND3933, ND3933I Fireplace
- UPC:
- 810136900293
- MPN:
- GFK4B
- Availability:
- In Stock - Free shipping to 48 States. Ships to Canada USPS. Normally ships by Next Business Day.
Description
Our GFK4B Fireplace Blower Fan Kit is designed for the Heatilator ND3933, ND3933I gas fireplace insert to circulate air around the firebox and enhance heat output. This complete fireplace blower kit offers a low cost solution to push heat created by the fireplace into your living space.
A speed control module with timer circuit is included with the blower kit which automatically turns the fan ON / OFF at preset times and is equipped with a Speed Button to provide a quiet airflow at the desired speeds. The timer circuit will delay fan operation; by automatically turning ON the fan 7 minutes after the main flame has been turned ON (After the fireplace has warmed up) and turning the fan OFF 12 minutes after the main flame has been turned OFF (After the fireplace has cooled down).
GFK4B Blower Kit Installation Instructions
Fireplace Blower Kit Includes
- Blower
- Speed Control Module with Timer Circuit by Skytech
- Jumper and Ground Wires
- Hardware and Adhesive Velcro Strips/Dampening Pad - (Easy to install plus reduces Vibration)
- Installation Instructions
- 1 Year Comprehensive Warranty on Blower
- 2 Year Warranty on Control Module
Product Specifications
- Dimensions in Inches: W: 12.94 x H: 3.6 x D: 4.27
- Motor is equipped with Thermal Safety Switch
- Bearing Construction Type: Ball Bearings
- CFM: 135
- AMPS: 0.74
- HZ: 60
- Volts: 115
- RPM: 3000 (1/1400 with load)
- Rotation: CW
- Blower Wheel Dimensions: Width: 9.45in (240mm) Diameter: 2.56in (65mm)
- Anti-Vibration Impellers & Vortex Regulation Tabs to provide a steady airflow
Product Benefits
- This fireplace blower fan produces high airflow and is manufactured with quality parts and components
- Increase Heating Potential of your gas fireplace insert with this hgih airflow blower fan
- Simple wiring connections makes installation Quick and Easy
If you have had any custom work done to your gas fireplace insert, compare the dimensions listed with the clearance in your appliance to insure proper fit.
GFK4B Fireplace Blower Diagram with Dimensions
This fireplace blower fan kit was Assembled & Tested in the Midwest which includes parts Manufactured in the USA. Industry Research & Design contributed to the manufacturing of this high quality aftermarket fireplace blower kit and is designed to meet the original equipment specifications. The instruction manual provided may not include specific information about your exact fireplace model, though we try to provide technical support in assisting you.
Additional Information
FIREPLACE BLOWER KIT: |
GFK4B |
COMPATIBLE BRAND: |
Heatilator |
COMPATIBLE FIREPLACE: |
ND3933, ND3933I |
7 Reviews
-
After Market Purchase
Existing fireplace didn't have a blower when I bought the house. Found this product through Google with Fireplace model#. Instructions are good. Wiring is easy. Installation was a pain as the blower barely fits through the lower opening and past the gas pack. Blower is louder than I anticipated and provides less forced air than expected. But is better than nothing. Overall worth the effort and investment. Also should have purchased the remote upfront. Purchase was easy and shipment was as promised.
-
Great Product
Easy to install. Perfect fit for the fireplace. I had to disconnect the gas line temporarily to make the install. But other than that it was a snap. Great instructions easy to follow and execute. Running the fan on the lowest setting ... just barely hear it running. Higher settings and the noise becomes somewhat annoying, but low works well for our application.
-
easy to install
Works great
-
Good blower bad attachment
The blower work very well, and the installation is easy. The only issue I have is the Velcro used to attach the blower to the fireplace does not hold. I am only able to use the fan on low or medium low or the blower will dislodge from the fireplace and vibrate terribly. I will then have to wait for the fireplace to cool down and try and reattach it. -------------------------------------------- MyFireplaceBlower.com Response: I believe someone on our support team spoke with you about making sure the surface area where the blower will be installs is clean and free from dust. This will insure when you press an hold the blower against the back wall, the adhesive strips will take hold and preform like intended.
-
Perfect transaction from order to installation.
This company 'gets' it. When I was looking for a fireplace blower I checked around at a few places, including a local high-end fireplace store, as well as national 'big box' outlets. Then I searched online and came across myfireplaceblower(.)com. The website was very easy to navigate and I found the fan I needed in literally a few clicks. The price was reasonable and check out was easy. But here's the best part: They followed up after the order the next day to let me know that it had shipped and when to expect it. And when they said it should be here guess what? It was delivered that very day. The fan arrived well-packed with those plastic bubble things (that my kids enjoyed popping) and VERY CLEAR instructions that made it a breeze to install. Works like a charm. I'm a happy customer. Every retailer can learn from this experience!
-
A short time use of product - exact fit
Very prompt service and very helpful customer service. They double checked my fireplace model to insure I ordered the correct blower. This blower is very quiet and has worked well since it was installed a few weeks ago.
-
Exact Replacement
Everything that came in the box was an exact replacement for the fireplace original.
Related Products
GFK4B - GFK4 Fireplace Blower Kit for Heatilator Fireplaces
MyFireplaceBlower
GFK4B Fireplace Blower Fan Kit for Heatilator NDV4236, NDV4236I Fireplace
MyFireplaceBlower
GFK4B Fireplace Blower Fan Kit for Heatilator NDV4236L, NDV4236IL Fireplace
Heatilator